Unique smooth reflector design provides great throw beam distance and beam pattern
Aircraft grade aluminium, mil-spec hard anodised for maximum wear
Toughened ultra-clear tempered glass lens with anti-reflective coating
Large copper heat sink pad for superior thermal conductivity
LED indicator turns red (below 12V) to alert user to switch lower output mode and recharge batteries in time
Front red /green LED for easy following.
1pc CREE XHP35 HI LED with a lifespan of 100,000 hours
Battery options: 4pcs high drain 18650 rechargeable Li-ion battery
Output & Runtime:
o Turbo (2300 lumens/1.8hrs),
o High 2(1200 lumens/2hrs),
o High 1(600 lumens/3hrs),
o Medium (200 lumens/ 8hrs)
o Low (20 lumens/30hrs),
o Moonlight (0.5lumens/39days).
Peak beam intensity: 902,500cd
Waterproof to IPX7 Standard
Impact resistant: 2 metres
Dimensions: 209mm (length) x 91mm x 50mm
Weight: 540g (without battery)
Accessories: Shoulder strap x1, Spare O-ring x2, Battery Carrier x1 (inside the flashlight), User manual x1, Storage box x1
Click main switch to change different brightness (0.5 lumen>20 lumen>200 lumen>600 lumen>1200lumen), five different brightness are separated by OFF.
Double click the main switch for interchanging brightness modes and flash mode, into the corresponding memory function mode.
Then click switch to change different flash modes: Warning flash, Variable frequency flash, SOS, Cycling mode, Signal flash, Pulse, Traffic light flash, Night mode.
Triple click main switch to access strobe at any state in brightness modes, one click gets you back to the state you were in.
Press hold main switch more than 0.5 second for momentary activation (100%), release switch gets you back to mode you were in.
Press hold main switch more than 0.5 second twice within 3 seconds for 100% constant on, click again gets you back to mode you were in.
You can save one different mode or output on each switch next to main switch. (Press hold the switch more than 0.5 second that you want to save - led indicator on main switch flashes means its saved).
Please exercise caution when using higher output levels. Light body gets hot when the light is on for long period of time and avoid shining the beam directly into the eyes. This product is high power device and capable of causing eye damage.